wheel bearing Regular maintenance and inspection of bearing

Play and its performance to maintain long-term to make the bearing fully, must cogent do regular maintenance (check). Through regular check for proper, do wheel bearing‍ early detection of failure, to prevent accidents, is very important to improve the productivity and economy.

1, cleaning

Remove the bearings when the examination, using methods such as photographic appearance record. In addition, to confirm that the remaining amount of lubricant and lubricant sampling, and then cleaning bearings.

A bearing cleaning, rough cleaning and washing, and the metal frame at the bottom of the container placed on the use of.

B, rough when Taper roller bearings‍ washing, use the brush in the removal of grease or oil adhesion. At this point if oil bearing, attention will be due to foreign bodies such as damage the rolling surface.

C, sperm washing, slowly rotating bearings in oil, be careful.

Cleaning agents are commonly used as neutral without water diesel or kerosene, sometimes using temperature as needed, such as lye. No matter what kind of cleaning agents, are often self aligning ball bearing‍ filtered clean.

After cleaning, immediately on the bearing coating antirust oil or antirust grease.                                                                  ‍