wheel bearing Job requirements

For harsh heavy loads, working conditions or special requirements for sealed bearings configuration, you can use the built-in contact-type seals Spherical roller bearings. The bearing dimensions are identical and non-sealed bearings, in many cases can replace the non-sealed Other bearing‍ bearings. Allow aligning angle of 0.5 °, an operating temperature of -20 ℃ ~ 110 ℃. Inner bearing has filled the right amount of lithium-based grease rust, grease can be added according to user requirements. Depending on whether the wall and the inner ring with cage, can be divided into C-type and CA-type two basic types, C-type wheel bearings are characterized by inner wall and the use of steel stamping cage, Series super thin section bearings‍ CA-bearing characteristics compared to both sides of the inner wall and the use of the car solid cage. These bearings are especially suitable for heavy work load or vibration loads. Spherical roller bearings have two raceways in the inner and raceways between spherical outer ring, equipped with a drum-shaped roller bearings [2]. The outer ring raceway curvature center and bearing center line, so has the same self-aligning ball bearing self-aligning feature. When the shaft, shell deflection occurs, you can automatically adjust load and axial load in two directions. Radial load capacity, for a heavy load, impact load conditions. Inner diameter is tapered bore bearings can be installed directly. reali slim bearings‍ Or use an adapter sleeve, remove tube installed in the cylinder axis. Cage with steel stamping cage, forming polyamide cage and copper alloy machined cage.