2014年12月12日星期五

Spherical roller bearing temperature rise causes and treatment methods

When the bearing temperature rises, first determine whether the malfunction, as indeed increased, should be treated as follows:
1, bearing installation position is not correct, it will cause a large ball end and bearing inner race and outer race gear units of the axial force, resulting in bearing overheating.
2, the best selection of bearings specified levels of precision linear motion bearings.
3, using the bearing shaft bending or fever caused by different heart box hole solution is to repair the spindle
4, bearing belt too tight cause fever solution is to adjust the belt so elastic appropriate.
5, the heat caused by poor lubrication solution is chosen lubricating materials specified grades and properly cleaned.
6, the heat caused by the low quality of assembly solution is to improve the quality of assembly.
7, bearing in the housing causing fever lap solution is to replace worn parts bearings and related balance correct impeller diameter and check static equilibrium value
8, the axial force caused by too much heat solution is clean, align the seal ring clearance requirements
9, bearing damage caused by the heat of solution is to replace the bearings. When we use spherical roller bearings, and if we find that under high temperature conditions, then quickly stop the operation of equipment, and then to find out why, and processed in accordance with the above solutions provided, but may be due to bearing fever for different reasons, so the solution in different ways, they still want to treat specific conditions, completed with the help of the technical staff.

没有评论:

发表评论