Application of the tilt sensor on heavy machinery

Tilt sensor applications is already very widespread, many machines and electronic devices are in use above the tilt sensor, tilt sensor can be used in heavy machinery, or above, the following Chinese sensors trading network come to you specifically tell us about it.Now more and more engineering machinery and equipment to the electro-hydraulic system transition from traditional mechanical hydraulic system, especially for the wide application bus replacement and upgrade the efficiency of construction machinery products provide a very good technology platform. Such as pavers, graders, excavators, lifts, cranes, etc., to achieve automatic control, you need to tilt the body itself and the implementing agencies to measure, but security is also widespread attention. For example, the verticality of rotary drilling rig mast rig measurements and prior work, the need for the entire mechanical equipment itself to adjust the attitude and want to reach the level of state; lifting deck crane bearing boom angle and excavator digging depth control, etc. angular measurements need to be controllable.
Shuo Feng Technology as a leader in the field of angle measurement for the construction machinery industry offers a variety of measurement accuracy, applications, input / output, and the apparent size of the angle sensor products, including a variety of output signals RS485, RS232, SPI, analog output, etc. / interface. Meanwhile Luoyang Huayang Special Heavy-Duty and Large Bearing Manufacturing Co.,ltd. To meet the diverse and specific technical requirements, provide orientation when drilling deep hole measurement products and complete applications as well as applications of vibration detection.
The angle of the crane bearing boom chassis leveling measurements Crane with a variety of models, do a lot of weightlifting work every day around the world, but unfortunately often the accident, when the load could cause the tilt or turn, some accidents are devastating. The investigation of the accident many conclusions drawn, a consensus is that if an accident near the former operator to get some form of warning, most of the accidents can be avoided.
To reduce accidents, manufacturers developed a number of safety systems: safety load monitors, these sophisticated real-time monitoring system to change marine crane bearing

. In order to make a required measurement is critical to the functioning of the system is a boom angle, which is measured by the tilt sensor, which is the typical inclination sensor applications.
Cranes on the chassis before work to reach the level of the entire state apparatus, on the one hand to ensure safe operation, on the other hand, the maximum tonnage lifting. This is achieved by a dual-axis tilt sensor to measure the inclination of the chassis in all directions, while the angle of the output signal to the PLC to drive the hydraulic ram to achieve the chassis level. Angle measurement used to calculate the boom lifting height and make the entire device to prevent the occurrence of excessive lifting overturning.