The reason of the delamination damage wheel bearing :
1, excessive load
2, poor installation (non linear), torque load, foreign intrusion, water.
3, poor lubrication, lubricant inappropriate bearing clearance is not appropriate.
4, the accuracy of bearing box is not good, the rigidity of bearing box uneven shaft deflection
5, rust, corrosion, abrasion and indentation (surface deformation) causes the development.
Guide roller, guide, slider, linear bearings, miniature ball bearings series of deep groove ball bearing series needle roller bearings, thrust ball bearings
What measures to take to solve the peeling of bearings damage:
1, check the load size and Double Row Ball Slewing Bearing again using the Institute
2, improve the installation method, improved sealing device, shutdown protection.
3, the use of appropriate viscosity lubricant, improve lubrication method.
4, check the accuracy of the shaft and housing
5, check the clearance.
Bearing is the other parts on the shaft will produce relative motion, used to reduce friction coefficient during power transmission and keep the machine shaft center fixed position, its main function is to support the rotary body, in order to reduce the equipment in the transmission process of mechanical load friction coefficient. According to the motion of the frictional properties of different components, bearings can be divided into two types of rolling bearings and sliding bearings.
没有评论:
发表评论